Belkin International Inc. F9K1009V1 Manuale Utente
USING YOUR ROUTER
21
Click “Click here to enter your DNS Settings” to configure DNS
information.
Either select or clear the “Automatic from ISP” check box. If you clear the
check box, in the “DNS Address and Secondary DNS Address” fields
enter the IP addresses of the primary DNS server and the secondary
server (if available). At least enter one DNS server IP address.
Click “Apply Changes”.
If after a few minutes your Internet Status says “Connected”, you’re
done! You can surf the Internet.
Telstra Bigpond/OptusNet Cable
Use this option for Bigpond Cable and OptusNet Cable connections
only.
Cloning your MAC address
Belkin provides the ability to clone (copy) the MAC address
of the computer into the Router. This MAC address, in
turn, will be seen by the ISP's system as the original MAC
address and will allow the connection to work.
If you are not sure if your ISP needs to see the original MAC
address, simply clone the MAC address of the computer
that was originally connected to the modem. Cloning the
address will not cause any problems with your network.
To Clone your MAC address, make sure that you are using the
computer which was ORIGINALLY CONNECTED to your modem
before the Router was installed. Click the “Clone” button and click
“Apply Changes”. Your MAC address is now cloned to the Router.