Lectronic Kaddy Corporation 92021 Manuale Utente
To start the ‘Kaddy using your remote control, hand held, transmitter, simply
press the centre round button.(see illustration) Holding down this button will
gradually increase the speed of the ‘Kaddy. Release the button when the
desired speed has been reached, the ‘Kaddy will then maintain this speed.
press the centre round button.(see illustration) Holding down this button will
gradually increase the speed of the ‘Kaddy. Release the button when the
desired speed has been reached, the ‘Kaddy will then maintain this speed.
To stop the ‘Kaddy, press the lower round button once. This will disengage
power to the motors. Continuing to hold down this button, or pressing a second
time, will cause the brakes to activate.
power to the motors. Continuing to hold down this button, or pressing a second
time, will cause the brakes to activate.
To initiate a turn, press, and hold down, the toggle switch either to the right, to
initiate a right turn, or to the left for a left turn.
initiate a right turn, or to the left for a left turn.
Initiating the turn when the ‘Kaddy is already in motion, will result in gentle
turning or course correction. If a more aggressive turn is required, then first
stop the ‘Kaddy then press and hold the toggle switch either left or right.
Release the toggle switch to allow the ‘Kaddy to revert to a straight path.
turning or course correction. If a more aggressive turn is required, then first
stop the ‘Kaddy then press and hold the toggle switch either left or right.
Release the toggle switch to allow the ‘Kaddy to revert to a straight path.
If turning was initiated after stopping the ‘Kaddy, then, upon releasing the turn
command, the ‘Kaddy speed will revert to the lowest setting and it will be
necessary to increase speed by pressing the centre round button as described
in the starting procedure.
command, the ‘Kaddy speed will revert to the lowest setting and it will be
necessary to increase speed by pressing the centre round button as described
in the starting procedure.
Remote
Oper
ation