Primax Electronics Ltd BPHS-8 Manuale Utente

For battery charging.

Relays the caller's voice.

Picks up your voice input.

Indicator light
Switches the headset on and off
Answer incoming call
End active call
Reject incoming call

Thanks for purchasing PHS-8 Bluetooth Headset. Your Bluetooth Headset is 

a stylish headset that enables comfortable handsfree communication with 

compatible phone that supports Bluetooth technology.

Remove all components from the package... 
  Bluetooth Headset  (with 15 mm diameter earbud)
  AC Battery Charger
  User Guide

Before using the Bluetooth Headset, you need to charge the built-in 
rechargeable battery for approximately 2 hours. The indicator light is
red while charging. When the battery is fully charged, it provides up to 7 
hours talking time and up to 170 hours standby time.

1. Connect the AC battery charger cable’s Micro USB connector to Bluetooth 
Headset’s Micro USB socket. 

2. Plug the charger’s AC plug to AC outlet. When charging, the Bluetooth 
Headset’s status indicator lights in solid red.

3. When the battery is fully charged, the status indicator turns to green.  
Unplug the charger cable from AC outlet and Bluetooth Headset.

To enter pairing mode manually...

1. The headset must be in off mode.

2. Press the multifunction button for at least 5 seconds. Blue LED light 
    flashing rapidly, and 4 ascending tones can be heard. Your mobile 
    phone can now "look for" the headset.

3. Activate the Bluetooth connection with the mobile phone according to  
    the mobile phone’s user’s guide.

4. Set the mobile phone to search for the Bluetooth devices according to 
    the mobile phone’s user’s guide.

5. Select the Bluetooth Headset from the phone menu.

6. Enter the pin code 0000 to connect (or “pair”) Bluetooth Headset to the 
    phone. You will hear two high tones when pairing completed. 

7. Select ‘PHS-8’ from the device list on your phone. The LED will light 
    rapidly every 5 seconds with the headset connected to your phone.

If the headset is turned on within 10 meters from several paired phones,  
the headset will try to connect to the last connected device. If the headset 
does not connect to the last connected phone, green LED will be flashing
every 5 seconds indicating it is in power on however not engaged status.

If the headset is turned on but not connected established, it will stay in  
connectable status for 5 minutes before automatically turn off.

If the headset is dropped off from previous connection, it will stay in
connectable status for 30 minutes before automatically turn off.

Phone list can be erased by holding the multifunction button, then 
pressing volume + key 6 times at an interval of 0.5 seconds.

Pairing is the process for linking the headset with your Bluetooth enabled 
mobile phone. After this process is completed, you can use the Bluetooth 
Headset with the paired mobile phone. The Bluetooth Headset can be 
paired with up to 8 compatible phones but connected to only one phone 
at a time. If the headset is turned on with no existing pairing information 
stored (e.g., first time use or pairing information been erased), it will enter
pairing mode automatically.