Guangzhou Panyu Juda Car Audio Equipment Co. Ltd. WSP67 Manuale Utente

TY-WSP67

Wireless Speaker

Operation Manual

Thank you for purchasing this product.
To use this product safely, read and understand this operation manual thoroughly before using
it. After reading this manual, keep it in a safe place so that it can be used when necessary.

5016900

Safety precautions

The information you need to prevent danger to the user and other people as well as property

damage is described below. “Description of signs” shows different categories of the degree

of danger or damage that may occur due to wrong handling. “Description of symbols” shows

the meaning of the symbols.

Important notes

• This book is only a guide for user's operation, not a criterion for configuration.

• Only use attachments/accessories specified by the manufacturer.

The lightning flash is intended to alert the user to the presence of

dangerous voltage within the product's enclosure, and touching the

internal components may result in a risk of electric shock to persons.
The exclamatory mark is intended to alert the user to the presence of

important operating instructions.
To reduce the risk of electric shock or fire, do not open the cover. Refer

servicing to qualified service personnel.

Description of signs

Indicates that there is a risk of death or serious injury.
Indicates that there is a risk of minor injury or property damage.

Description of symbols

Indicates “Prohibition” or “You must

not do” with pictures and text.

Indicates “Mandatory Action” or “Do as

indicated” with pictures and text.

What to do in the case of an abnormality

• Stop using the device immediately in case of an abnormality or failure.

• Remove the power plug immediately when water or any foreign object enters the

interior of the device. It may cause a fire or electric shock. Remove the power plug

immediately, and contact your dealer for a repair.

Power cord and power plug

To reduce the risk of fire, electric shock or product damage,

• Insert the power plug fully into an AC receptacle.

• If you find dust on the power plug pin or pin installation surface, remove the power

plug and remove the dust.

• The mains plug or an appliance coupler is used as a disconnecting device, the

disconnecting device shall remain readily operable.

• Do not insert or remove the power plug with a wet hand.

• Observe the following when handling the power cord.

• Do not damage it.

• Do not modify it (e.g. extension).

• Do not heat it.

• Do not pull it.

• Do not place a heavy object on it.

• Do not pinch it.

• Do not bend it forcefully.

• Do not twist it.

• Do not bundle it.

• If the device will not be used for a long time, remove the power plug from the

receptacle.

• Do not use any power cord other than the one that comes with the device.

• Do not use the power cord that comes with the device for any other product.

Usage

To reduce the risk of fire, electric shock or product damage,

• Do not disassemble, repair, or modify the unit . Refer servicing to qualified service

personnel.

• Do not step on, throw the power supply or unit, or expose them to a strong shock.

• Do not throw the unit into fire.

• Do not install this unit in a confined or built-in space such as a book case or similar

unit, and keep a well-ventilated conditions. The ventilation should not be impeded

by covering the ventilation openings with items such as newspaper, table-cloths,

curtains etc.

• Do not expose this unit to rain, moisture, dripping or splashing.

• Do not place objects filled with liquids, such as vases, on this unit.

• Do not insert any foreign object into the device.

• In case of lightning, do not touch the power cord.
• Place the unit on a flat surface away from sources of direct sunlight or excessive

heat.

• The unit is not for use by children, and keep it out of reach of children.

• Before carrying the device, remove the power plug from the receptacle.

• Do not place a heavy object on the device.

• To prevent possible hearing damage, do not listen at high volume levels for long

periods.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

15.

This equipment is a Class II or double insulated electrical appliance. It has been

designed in such a way that it does not require a safety connection to electrical earth.

16. No naked flame sources, such as lighted candles, should be placed on the apparatus.

17. Attention should be drawn to environmental aspects of battery disposal.

18. The product is designed to use in moderate climates.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance

20CM between the radiator & your body.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1) This device may not cause harmful interference, and 2) This device must accept any

interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communication. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

IC-CANADA

This device complies with Industry Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) this device may not cause interference,

and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil s’accorde avec Industrie Canada licence-exempte RSS standard. (1)

cet appareil ne peut pas causer l’intervention, et (2) cet appareil doit accepter de

l’intervention, y compris l’intervention qui peut causer l’operation non desiree de.

Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.

California Prop 65 Warning

This product contains chemicals, including lead, known to the

State of California to cause cancer and birth defects or other

reproductive harm. Wash hands after handling.

Disclaimer

• Toshiba shall not be responsible for any damage caused by an earthquake,

thunderstorm, flood damage, fire for which Toshiba is not responsible, acts of a third

party, other accidents, or damages caused by the user’s willful acts or negligence,

misuse, or use in abnormal conditions.

• Toshiba shall not be responsible for any damage caused by failure to observe the

information described in the operation manual.

Disposal

• When disposing of this device, observe the laws, or ordinances and rules of the local

government.

• When disposing of the battery, make a request to a recycle agency for disposal.

About Using Bluetooth®

This unit is designed for use with Bluetooth® wireless devices compatible with the HFP, HSP,

A2DP and AVRCP streaming audio profiles. Refer to your Bluetooth® device’s user manual or

technical support to determine if your Bluetooth® device supports these profiles.

Frequency band used

This unit uses the 2.4 GHz frequency band. However other wireless devices may use 2.4 GHz

frequency band as well and may cause interference with each other. To avoid interference,

please refrain from the use of the unit at the same time with other wireless devices.

Certification of this device

This unit conforms to frequency restrictions and has received certification based on

frequency laws, so a wireless permit is not necessary.

However, the following action is punishable by law in some countries:
• Taking apart/modifying the unit.

Usage restrictions

• Wireless transmission and/or use with all Bluetooth® equipped devices is not guaranteed.
• A device featuring the Bluetooth® function is required to conform to the Bluetooth® standard

specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms

to the above mentioned Bluetooth® standard, some devices may not be connected or work

correctly, depending on the features or specifications of the device.

Range of use

Use this device within an unobstructed 10 m range. The range of use or perimeter may be

shortened depending on any obstructions, devices causing interference, other people in the

room, or the construction of the building. Please note that the range mentioned above is

not guaranteed.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and are used

under license.

Note

• This unit may receive radio interference caused by mobile telephones during use. If

such interference occurs, please increase separation between this unit and the mobile

telephone.

Maintenance

To clean this system, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this system.
• Before using chemical cloth, read the instructions that came with the cloth carefully.

Connecting the AC cord

Insert the provided AC cord into the AC power socket on the back of

the speaker.

Insert the power plug into an AC receptacle.

The standby indicator lights in red.

Press the POWER/FUNCTION button to turn on the speaker.

The standby indicator lights off and one of the function indicators (USB/LINE IN/

BLUETOOTH) lights up.

Controls and Indicators

5 6

BLUETOOTH indicator (Blue)

VOLUME knob

LINE IN indicator (Green)

BASS knob

USB indicator (Orange)

TREBLE knob

STAND BY indicator (Red)

Skip Forward/Backward button

LINE IN socket

Play/Pause/PAIR button

USB port

POWER/FUNCTION button

Speaker air hole

AC power socket

Using this speaker

Listening to Bluetooth® Music

In order to use the unit for music playback or speakerphone functions through Bluetooth®,

the speaker must first be paired with the Bluetooth® device.

Pairing:

Press the POWER/FUNCTION button on the speaker to switch to

Bluetooth® mode.

The Bluetooth® function will go into pairing mode and the blue indicator keep flashing.

Following the instructions in your device's user manual, activate

Bluetooth® on your device and search for devices.

Once you have found "TY-WSP67”, pair with the speaker.
• Input the pass code "0000" if required.

Once connected, a pairing successful sound is heard.
• The blue indicator of the speaker will remain lit.

Information:

• This speaker will pair with the last connected device when that device is in range.
• The Bluetooth® pairing can be canceled by pressing and holding the Play/Pause button

for more than 3 seconds. Then a canceling successful sound is heard.

• If there is no operation or nothing is played back in Bluetooth, USB, or LINE IN mode for 30

minutes, the speaker will automatically go into standby mode.

Playing Bluetooth® Music:

Once your device and the speaker are paired, you can play music on this speaker through

Bluetooth®.

Press the Play/Pause button either on your device or this speaker to

play or pause music.

Use the VOLUME/BASS/TREBLE knob on this speaker to adjust the

level.

Turning off the power

Press and hold the POWER/FUNCTION button to turn off the speaker.

The standby indicator lights in red.

Playing line-in Music

You can connect an MP3 player or other portable audio device through this speaker via the

LINE IN socket.

Plug a 3.5 mm plug into the headphone or line-out jack on your

device and plug the other end of the cable into the LINE IN socket of

this speaker.

Press the POWER/FUNCTION button on the speaker to switch to LINE

IN mode.

The LINE IN indicator lights in green.

Turn on and play your device.

Adjust the volume level on your device or use the VOLUME knob on

this speaker.

170418c1_TY-WSP67_EN.indd 1

2017/04/18 11:15:52