DEI Headquarters Inc. HYU1800 Manuale Utente

 

 
 

 

For vehicles that do not have a Tach source, in this 
case skip this step. 

(Refer to the Virtual Tach System when 

programming the unit)

 

 

Run the purple wire of the remote starter’s 5-pin accessory connector (Fig 2) alongside 
the firewall to the passenger’s kick panel. Be careful not to interfere with pedals and 

steering assembly. 

FIG 2 

 

Locate the connector EM-11 and connect the remote starter Tach input (Purple wire) to 
the Blue/Red wire at pin #5 (Picture Q). This wire can be tested with an A/C voltmeter. 

The reading should be between 6 and 8 volt A/C when the engine is idling. A 
frequency meter should read between 35 and 50Hz.  

 
 

 

 

 

 

 

 

 

 

 

 

 

                      Picture Q