B+B SmartWorx WLNG1 Manuale Utente
Maintain the All-in-One
31
Clean the wrist case and hand mount
Use a baby wipe or a cotton cloth dampened with deionized water to scrub all areas of the hand
mount, straps, and wrist case that have come into direct contact with the skin.
mount, straps, and wrist case that have come into direct contact with the skin.
Clean the door
To clean the opening in the door, do the following:
IMPORTANT:
Do not touch the metal contacts or the ink nozzles.
1.
Remove the print cartridge from the door.
2.
Use a dry cotton cloth to remove the ink-soaked fibers from the opening in the door.
3.
If the ink is too dry to easily remove the fibers, use a cotton swab dampened with deionized
water to break down the ink buildup.
water to break down the ink buildup.
Charge the battery
To charge batteries, follow the instructions that came with your battery charger.
Remove the hand mount or handle accessory
1.
Squeeze both of the release buttons on the back of the hand mount.
2.
Slide the hand mount backward, off of the All-in-One.
1
Release button
IMPORTANT:
If you are using the handle accessory instead of the hand mount, see the
instructions that were included with the handle accessory.