Digital Security Controls Ltd. 16WS90029 Manuale Utente
Chapter 2.0 General System Operation
Armed
Status Light
LED indicator
Description
ON Steady
The partition is armed..
Flashing
The system in Alarm.
Note: Silent alarms or panic do not flash the Alarm
LED.
Note: Silent alarms or panic do not flash the Alarm
LED.
System Test
All status LEDs flash at the same time.
All status LEDs flash at the same time.
Installer Walk Test
Ready, Trouble, and Arm LEDs flash at the same
time.
Ready, Trouble, and Arm LEDs flash at the same
time.
OFF
The partition is disarmed
Trouble
Status Light
LED indicator
Description
ON Steady
A system trouble is present.
Flashing
[cadence of 500ms
On/500ms OFF]
[cadence of 500ms
On/500ms OFF]
[*][2] The Trouble menu is accessed.
Flashing
[cadence of 250ms
ON/250ms OFF/250ms
ON/750ms OFF]
[cadence of 250ms
ON/250ms OFF/250ms
ON/750ms OFF]
The system is in the second-level submenu.
Flashing
[cadence of 250ms
ON/250ms OFF/250ms
ON/250ms OFF/250ms
ON/750ms OFF]
[cadence of 250ms
ON/250ms OFF/250ms
ON/250ms OFF/250ms
ON/750ms OFF]
The system is in the third-level submenu.
Flashing
System Test
All status LEDs flash at the same time.
All status LEDs flash at the same time.
Flashing
Installer Walk Test
Ready, Trouble, and Arm LEDs flash at the same
time.
Ready, Trouble, and Arm LEDs flash at the same
time.
OFF
System troubles are cleared.
WiFi Signal Strength
Status Light
LED indicator
Description
ON Steady (green)
The radio is active with a strong signal connection.
ON Steady (yellow)
The radio is active with a weak signal connection.
ON Steady (red)
There is no signal.
ON Flashing (red).
There was hardware network reset.
Flashes red for several
seconds, then flashes
green
seconds, then flashes
green
System Test
All status LEDs flash at the same time.
All status LEDs flash at the same time.
OFF
Client Mode is OFF.
- 7 -