Ka Wah Manufactory Limited 31927 Manuale Utente

Your will need 

One 7.2V rechargeable battery pack (not included) 

One 9V battery for transmitter (not included) 

Battery Pack charger (not included) 

 

In Your Vehicle 

1.  Remove the battery compartment cover. 

2.  Place the battery pack in the compartment and attach its white connector 

to your vehicle’s matching connector.    Do not force them together.    They 

only fit one way. 

3.  Replace the cover and turn the latches to secure it. 

 

Note: 

If your vehicle moves slowly, or does not move at all, recharge your 

vehicle’s battery pack. 

 

In Your Transmitter 

1.  Remove the battery compartment cover and place the 9V battery in your 

transmitter. 

2.  Replace the cover. 

 

Note : 

When your transmitter’s range decreases, replace its battery. 

 

Driving your vehicle 

 

Vehicle 

The supplied antenna tube holds up the antenna wire for best reception. 

1.  Route your vehicle’s antenna wire through the tube. 

2.  Insert the tube securely into your vehicle’s tube holder. 

3. 

Slide to ON to activate the vehicle and drive it.    Slide to OFF when you are 

finished driving the vehicle. 

 

Transmitter 

1.  ON/OFF – Slide to ON to activate the transmitter and drive the car. Slide to 

OFF when you are finished driving the car. 

2.  Antenna – Extend the antenna to its full length before driving the car.    For