ClearOne DIALER Manuale Utente
SERIAL COMMANDS
The INTERACT Serial Commands guide can be found as a separate document. The document
contains a list of applicable serial commands, use and application for the INTERACT AT and
INTERACT PRO models.
contains a list of applicable serial commands, use and application for the INTERACT AT and
INTERACT PRO models.
Connecting with Telnet
Users can connect to any unit via RS -232 and Telnet. Available Telnet commands are the same as
those used in the Serial Command section of the INTERACT Serial Commands guide.
those used in the Serial Command section of the INTERACT Serial Commands guide.
How to Connect with Telnet:
l
Use the client of your choice
l
Telnet uses port 23
l
The user name and password are the same as used by INTERACT. The default username is
clearone and the default password is INTERACT. These are not case sensitive.
clearone and the default password is INTERACT. These are not case sensitive.
Note: The INTERACT PRO 8i cannot be controlled through RS-232 and Telnet.
RS-232 Port: INTERACT AT/Pro
Pin#
User Definable
Control
1
N
DCD
2
N
TXD
3
N
RXD
4
N
DTR
5
N
Ground
6
N
DSR
7
N
CTS
8
N
RTS
9
N
No Connection
Note: To avoid communication errors, ClearOne recommends using all nine pins
when connecting to the RS -232 port.
when connecting to the RS -232 port.
- 18 -