Lg Electronics LST2200 Manuale Utente
LGIC CDMA Fixed Wireless Terminal
LST-200/2200
12
and the wall;
5. Place the bracket over the two screws so that the screw head protrudes out of the
opening;
6. Slide the bracket downward until the screw head is locked at the top of the opening
and the bracket is secure;
7. Tighten the screws the bracket is resting upon;
8. Insert the terminal into the bracket until you hear two snaps (both sides of the unit
8. Insert the terminal into the bracket until you hear two snaps (both sides of the unit
should snap into the bracket);
9. Insert the DC power pack into an electrical outlet and attach the telephone line into
the Phone Jack (RJ-11) of the unit.
Note: Some wall materials may require special inserts of plugs to secure a screw and support
the bracket.
POWER
MODE
SIGNAL
TNC Antenna
Connector
FAX
PHONE
RS-232C
DC12V
RJ-11
RJ-11
RS-232C
Telephone
G3 analog fax
PC
< Figure 2. Connection Diagram with External Equipment >