TransCore 05846 Manuale Utente
ROVR SIDEKICK Installation and Operation v1.0 | Document Number 412158
Page 1 of 6
ROVR SIDEKICK
™
Installation and Operation
This document describes how to correctly install a
ROVR SIDEKICK™
device. The
ROVR
SIDEKICK
is
used with the
ROVR™
vehicle tracking unit for convenience in viewing toll rates
and paying for HOT lane use.
These instructions cover what you need to know to get your ROVR Sidekick up and running:
• Battery Installation
• Sidekick Unit Installation
• Operation
• Sidekick Unit Installation
• Operation
Battery Installation
1
The Sidekick requires 2 AAA batteries for
operation. Non-rechargeable lithium batteries
are recommended for maximum life. Some
high capacity alkaline batteries will also be
sufficient but have shorter lifetimes.
The Sidekick has a battery compartment.
Batteries are inserted in-line to the
compartment through a small door on the
side of the unit.
Open the door by removing the attached
thumbscrew.
operation. Non-rechargeable lithium batteries
are recommended for maximum life. Some
high capacity alkaline batteries will also be
sufficient but have shorter lifetimes.
The Sidekick has a battery compartment.
Batteries are inserted in-line to the
compartment through a small door on the
side of the unit.
Open the door by removing the attached
thumbscrew.
2
Insert both batteries negative (-) terminal first.
The top of the batteries will protrude from
the opening.
The top of the batteries will protrude from
the opening.
Thumbscrew
Door (removed)
Battery
compartment
compartment