Biolase Inc. EPIC Manuale Utente
24 |
P a g e
5 4 0 0 3 2 1 R e v . X : D R A F T
Figure 23
When the tip is
straight, the
aiming beam will
look like a circle,
outlining the
area where main
laser power is
applied.
straight, the
aiming beam will
look like a circle,
outlining the
area where main
laser power is
applied.
Figure 24
When the tip is
bent, the aiming
beam will look
like a spot, and
the main laser
power is
applied in the
middle area of
the spot.
bent, the aiming
beam will look
like a spot, and
the main laser
power is
applied in the
middle area of
the spot.
Wireless Footswitch
The wireless footswitch is powered by 2 standard AAA batteries.
When the wireless footswitch is pressed in READY mode and the laser fires, a beeper
will sound indicating that laser energy is present. A green LED will be visible on the top
right of the front panel. When the footswitch is not pressed, the green light will not
appear.
When the wireless footswitch is pressed in READY mode and the laser fires, a beeper
will sound indicating that laser energy is present. A green LED will be visible on the top
right of the front panel. When the footswitch is not pressed, the green light will not
appear.
PEAK POWER Display
This number is shown only when the system is in the pulsed mode and presents the
value of the peak power based on the Power setting, and Pulse Mode.
This number is shown only when the system is in the pulsed mode and presents the
value of the peak power based on the Power setting, and Pulse Mode.
PULSE Mode Selection
Pulse Mode selection graphically indicates whether the system is in Continuous
Mode or in Pulsed Mode.
In Continuous Mode laser power is constantly delivered when in Ready Mode and
the wireless footswitch is activated.
In Pulsed Mode, laser power is delivered in repetitive pulses, controlled by Pulse
Length and Pulse Interval settings.
Pressing the Pulse MODE button will allow switching between Pulsed and
Continuous Modes.
Pulse Mode selection graphically indicates whether the system is in Continuous
Mode or in Pulsed Mode.
In Continuous Mode laser power is constantly delivered when in Ready Mode and
the wireless footswitch is activated.
In Pulsed Mode, laser power is delivered in repetitive pulses, controlled by Pulse
Length and Pulse Interval settings.
Pressing the Pulse MODE button will allow switching between Pulsed and
Continuous Modes.
WARNING:
When aiming beam is not present or has significantly different shape,
change the tip and inspect / clean the protective window.
NOTE:
When the footswitch is not in use, it will go into “sleep” mode to conserve
battery power. It automatically reactivates when it is pressed.