Eizo Nanao Corporation EX240W Manuale Utente

16    User’s Guide

Power LED : Lights up to indicate the power is turned ON.

Power Switch : To power ON or OFF the monitor.

Rotary switch : With the OSD menu activated, increases the value of the selected 

(Ture Right)      parameter or moves rightward in OSD menu.

Rotary switch : With the OSD menu activated, increases the value of the selected 

(Ture Left)         parameter or moves leftward in OSD menu.

PIP Switch : To enable or disable Picture In Picture function.

PBP Switch : To enable or disable Picture By Picture function.

POP Switch : To enable or disable Picture On Picture function.

Adjust Switch : To activate or deactivate image adjustment in sub screen of PIP, 

 

           PBP, POP mode.

Locker Switch : To turn ON or OFF the system.

1. Push the “Knob” button to activate the OSD menu.

2. Able to turn left or right the button to select those icons. The icon will be 

    highlighted when is selected.

3. Push the “knob” button to go into the another OSD menu.

4. Turn left or right “Knob” button to increase or decrease the number of selected 

    function.

5. In order to exit from the OSD menu in a different layer, then choose the “Exit 

    option”. In case of long pushing and holding the button around two or three 

    seconds, then it will completely out from the menu regardless wherever you are.

6. Turn the “Knob” button in a fast way to the left or right, while the menu is not 

    activated, then input signal menu will turns up with “V” mark which is chosen 

    current available input signal. You can switch to another input signal source by 

    turning the knob slowly then select the target source by pushing the knob.