Xirgo Technologies Inc. XT4970D Manuale Utente

 

 

              

11 

 

 

To start up the device, simply hold the black button located near the circular connector on the 

side panel of the device for 3 seconds. You should see the blue “C” LED light up and then fade out. 

The blue LED will blink when the device is successfully connected to the network. Refer to table 

in section 2.3 for LED behavior. 

 

 

Note: The factory default settings are configured to have the device to sleep within 2 minutes of 

wake. Consider pulling the IN1 wire high to keep the device awake for configuration purposes or 

disable sleep by issuing the proper 3017 command. 

 

 

 

 

 

 

 

 

Wake up Button