Psion Inc 7505BTMC75 Manuale Utente
Chapter 5: Settings
Changing Network Card Settings
Changing Network Card Settings
196
iKôn Rugged PDA (Windows Mobile 6) User Manual
•
If you need to specify server information, double-tap on the appropriate adaptor, and
then tap on the IP Address and/or Name Servers tab.
•
If necessary, use a network cable to connect the network card to your network. Refer to
the documentation shipped with your network card for details.
•
To activate the connection, launch the desired program (e.g., Internet Explorer). The
iKôn PDA will connect automatically.
5.34.4 Changing Network Card Settings
•
If you use your network card in two locations like work and home, you’ll need to
change the network to which the network card connects.
•
Tap on Start>Settings>Connections tab>Network Cards icon.
•
In the Configure Network Adapters dialog box, tap on the dropdown menu below My
network card connects to, choose either The Internet or Work.
5.34.5 VPN Connection Setup
A VPN connection provides a secure connection to servers through the Internet.
Before you begin, you need the following information from your network administrator:
password, domain name, TCP/IP settings and a host name or IP address of the VPN server.
•
Before you begin, you need the following information from your network administrator:
password, domain name, TCP/IP settings and a host name or IP address of the VPN server.
•
Tap on Start>Settings. Tap on the Connections tab followed by the Connections icon.
•
Under My Work Network, tap on Add a new VPN server connection.
•
In the Name field, type a name for this connection.
Note: Because most networks use DHCP, you should not need to change these settings
unless instructed to do so by your network administrator.