ViewSonic Corporation M3AWEB56GA Manuale Utente

10        ViewSonic airsync Display V210

Your airsync Display V210 has two power sources, AC (using the AC/DC 
converter) or battery. To run your airsync Display V210 from an AC outlet, 
use the supplied AC/DC adapter cable. 

It takes the airsync Display V210 approximately two (2.5) hours to recharge 
while not in use and four (4) hours while in use. In normal operation (when 
not connected to an AC outlet), the airsync Display V210 operates on battery 
power alone. A fully charged battery can last up to three (3) hours depending 
on power consumption factors such as the screen’s brightness setting. The use 
of optional PCMCIA card accessories will also affect battery life.

CAUTION: Replace only with an airpanel V110 series battery:

Part Number MW-BAT-003 

Charging

Storage

If the battery is left unattended too long, it may discharge completely. 
Complete discharge may damage the battery’s ability to recharge properly.

Battery Removal

To remove the battery, slide the Battery Latch then slide out the battery.

CAUTION: Removing the battery can cause the loss of file changes. Before 
removing the battery, we strongly recommend that you either:

• Drag any changed files that you want to protect to the V210’s Persistent 
Storage folder (under My Computer) before removing the battery. 

or

• Plug the AC Adapter into the V210 before removing the battery to prevent a 
disruptive interruption of power.

Initial Charging: Failure to fully charge the battery
for 5 hours before turning on the airsync for the first
time may reduce the overall service life of the
battery.

Storage: If you are not using the airsync on a daily
basis, store the unit by plugging it into an AC outlet
using the AC Adapter. For extended storage,
remove the battery completely.