DTC Communications Inc. PD2TX1000S Manuale Utente
9
HEAT SINK
Palladium 1000 Heat Sink
The Palladium 1000 is supplied with a heat sink attached. DO NOT remove the heat sink unless
you have an alternate mounting surface that will dissipate the heat properly.
you have an alternate mounting surface that will dissipate the heat properly.
WARNING: The Palladium 1000 may become too hot to touch without a proper
heatsink attached, such as the one supplied. Damage to internal components may
occur if operated beyond the recommended temperature range. If placed in an
enclosure, proper ventilation and mounting is required. If designing a custom heatsink,
keep the transmitter chassis temperature at 50
heatsink attached, such as the one supplied. Damage to internal components may
occur if operated beyond the recommended temperature range. If placed in an
enclosure, proper ventilation and mounting is required. If designing a custom heatsink,
keep the transmitter chassis temperature at 50
o
C or less. The transmitter must be
mounted to a heatsink on the transmitter’s “blank side” as shown on page 8.