LITE-ON Technology Corp. LE500 Manuale Utente

          Using Your LE500 Monitor

1 Position the monitor and the computer so that you can easily get at the back panel 

of each. Make sure all power cables can reach a properly grounded electrical outlet.

AC power connector

Video cable (permanently connected)

2 Connect the video cable to the matching blue video connector on the back of your 

computer.

3 Tighten the screws on the video cable connectors to keep them from coming loose. 

Tightening the screws also prevents radio and TV interference.

4 Connect the power cord that came with the monitor to the AC power connector at 

the back of the monitor. To maintain FCC standards, only use the cord that came 
with the monitor.

5 Plug the other end of the power cord into a properly grounded electrical outlet.

1 Turn off the system, then disconnect the monitor’s video and power cables.

2 Carefully set the monitor on its side with the bottom of the monitor facing you.

3 Rotate the base so that you can easily get to the retaining latch on the bottom of the 

monitor.

A