Toshiba TEC Corporation GN1041 Manuale Utente
1. Setting Up Wireless Network
24
GN-1041 Operator’s Manual — Setting Up the Infrastructure Mode
z
TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have
to specify the fixed rate, select [AUTO]. When [AUTO] is selected, this
equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you
select a static transmit rate.
Select the transmit data capacity for wireless communication. If you do not have
to specify the fixed rate, select [AUTO]. When [AUTO] is selected, this
equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you
select a static transmit rate.
11.
Confirm the settings and press the [FINISH] button.
•
The shut down screen is displayed.
SUPPLEMENT:
If you want to change the settings, press the [PREV] button to move back to the screen
that you want to change and then repeat the operation.
that you want to change and then repeat the operation.
12.
Press the [YES] button to shut down the equipment.
•
The wireless settings apply after restarting the equipment.
Selecting WPA/WPA2/802.1x security mode with PEAP protocol
Using the WPA/WPA2/802.1x authentication with the PEAP protocol, you must install
the CA certification file in the equipment. This equipment uses the user name and
password to authenticate the access rights to the wireless network, and the RADIUS
server authenticate this equipment using the CA certification file.
the CA certification file in the equipment. This equipment uses the user name and
password to authenticate the access rights to the wireless network, and the RADIUS
server authenticate this equipment using the CA certification file.
NOTE:
When using the WPA/WPA2/802.1x authentication with the PEAP protocol, you must
install the CA certification file in the equipment using TopAccess first. For instructions
on how to install the CA certification using TopAccess, please see TopAccess Guide.
install the CA certification file in the equipment using TopAccess first. For instructions
on how to install the CA certification using TopAccess, please see TopAccess Guide.