Toshiba TEC Corporation GN1041 Manuale Utente
1. Setting Up Wireless Network
GN-1041 Operator’s Manual — Setting Up the Infrastructure Mode
31
Selecting WEP security mode
The WEP is a data encryption method using the WEP key between the Access Point
and other wireless devices. Compared with WPA/WPA2/802.1x and WPAPSK/
WPA2PSK, the WEP is less security. If the wireless network is configured in the Infra-
structure Mode and the Access Point supports WPA/WPA2/802.1x or WPAPSK/
WPA2PSK, it is recommended to use WPA/WPA2/802.1x or WPAPSK/WPA2PSK
rather than WEP.
and other wireless devices. Compared with WPA/WPA2/802.1x and WPAPSK/
WPA2PSK, the WEP is less security. If the wireless network is configured in the Infra-
structure Mode and the Access Point supports WPA/WPA2/802.1x or WPAPSK/
WPA2PSK, it is recommended to use WPA/WPA2/802.1x or WPAPSK/WPA2PSK
rather than WEP.
1.
Press the [WEP] button and press the [NEXT] button.
•
The WIRELESS ENCRYPTION - WEP screen is displayed.
NOTE:
When GN-1040 is connected, the [WPA], [WPA2], and [WPA2PSK] buttons cannot be
selected.
selected.
2.
Enter the following items and press the [NEXT] button.
z
WEP ENCRYPTION
Select the bit length of the WEP key.
Select the bit length of the WEP key.
z
KEY ENTRY METHOD
Select the character code for the WEP key.
Select the character code for the WEP key.
z
[WEP KEY]
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and
Key Entry Method.
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and
Key Entry Method.
SUPPLEMENT:
When pressing the [WEP KEY button, the letter entry screen is displayed. Enter the
value using the keyboard and digital keys, and press the [ENTER] button to set the
entry.
value using the keyboard and digital keys, and press the [ENTER] button to set the
entry.
64bit
128bit
152bit
HEX :
10
26
32
ASCII :
5
13
16