Toshiba TEC Corporation OH0006 Manuale Utente

 

EO2-38058 

 

(1) 

This optional device is intended for the following models: 

 

  B-SX4T-GS20-QM-R and B-SX5T-TS22-QM-R, RFID ready printer. 

 

  An RFID Ready printer can be identified by the model name sticker on the front of the printer. 

 

Be careful not to install this product in the B-SX4T-GS10-QQ/QQ-US and B-SX5T-TS10-QQ/QQ-US 
RFID Ready printers. 

(2) 

To use this device, printer firmware V4.5 or greater is required.    Upgrade the firmware to V4.5 or greater, if 
necessary.    For the downloading procedure, refer to the B-SX4T/SX5T Series Maintenance Manual.   

 

Note that a RAM clear needs to be performed after downloading, so print out the maintenance counter and 

parameter settings prior to downloading.  After performing a RAM clear, restore the printer parameter 
settings to the former states.   

(3) 

The countries where the use of this device is allowed are as follows: 

Model Name 

Frequency Band 

Applicable Countries 

B-SX704-RFID–U2-US-R 

UHF 902.75 to 927.5MHz 

U.S.A., Canada 

 

All the following parts are supplied with the kit.    Make sure you have all items shown below. 
If any part is missing, please contact your TOSHIBA TEC sales agent. 

 

 

• Antenna Ass’y (1 pc.) 
 
 
 
 
 
 
 

 
 

•RFID R/W Module (1 pc.) 
 
 
 
 
 
 

 

• Antenna Frame 
 
 
 
 
 
 
 

• Ribbon Guide (1 pc.) 

 
 
 
 

 

• Bush (1 pc.) 
 
 
 
 

 
 
 
 
 

• Cable Clamp (1 pc.) 
 
 
 
 
 
 
 

 
 

•Interface Cable (1 pc.) 
 
 
 
 
 
 

 
 
 

• Double Sems Screw 
SMW-3x6 (5 pcs.) 
 
 
 
 

 
 
 
 

• Antenna Cable (1 pc.) 
 
 
 
 
 
 
 
 

 

• FCC ID Sticker (1 pc.) 
 
 
 
 
 
 
 
 

• Installation Manual   
(1 copy)

 

 

 

 

Contains 

 

FCC ID: BJIOH0006