Seiko Epson Corporation AP008 Manuale Utente

Buttons

1

Charging the Watch

2

Setting Up the Watch and App

17

Make sure to read the Notices sheet and online User’s Guide 

before using the product to ensure safe use.

Back

Start/Stop

Up

Enter

Down

Use the included USB charging clip to charge 
the watch.

1 

 Connect the USB charging clip to the watch.

2 

 Connect the USB cable to your PC or the 
optional AC adapter.

Make sure the watch is fully charged before 
you remove the clip.

 The Settings screen appears on the watch after 
you remove the USB charging clip.

1 

 On the watch, select your language and 
press 

 Enter.

2 

Select Set by Phone and press 

 Enter.

Note: You can also use a PC to configure the 
watch or you can configure the watch on 
its own. See the online User’s Guide for more 
information.

3 

 Download and install the Epson View app 
from your smartphone’s app store.

4 

 Launch the Epson View app and create 
an account or log in. After you finish this 
process, the initial Settings screen appears 
on your smartphone.

3

Using Your Watch

 

1 

 Press 

 down on the Time screen to display 

the workout mode screen.

Note: You can press   Start/Stop on the 
Time screen to quickly start a workout.

2 

 Press 

 up or 

 down to select the 

desired activity.

The following workout modes are available:

Run 

     Walk 

     Treadmill 

3 

 Press 

 Start/Stop while outdoors with no 

obstacles overhead to start GPS calibration.

 You can start your workout when the 
Measurement screen appears.

For increased GPS accuracy, wait at least 15 
minutes before starting your workout. You 
only need to perform this extended GPS 
calibration the first time you use the watch 
or if you do not use it for a few months.

Note: If you see the message below, do one 
of the following:

Move to an area with no obstructions 
overhead and then press 

 back to 

restart GPS calibration.

Press 

 Enter to start the workout. 

Distance traveled will be estimated until 
the GPS signal is fully acquired.

Press 

 Start/Stop on the Measurement 

screen to start a workout.

Note: You can press   Enter during a 
workout to start and record a new lap.

Press  

 up or 

 down during a workout to 

change the measurements that appear.  See 
the online User’s Guide for more information.

5 

 Note the code that appears on the watch.

6 

 Select  ProSense 17 from the list on your 
smartphone, then follow the instructions to 
pair your watch and your phone.

 The Time screen appears on the watch when 
the process is complete.

Note: You can pair the watch with your 
smartphone at any time by selecting My 

Watch in the Epson View app.