Philips Consumer Lifestyle NP2900 Manuale Utente

18

The NP2900 shows the confirmation 

for the connection to the Internet.

First-time setup: Wired connection 

with static IP address

This is how to navigate and select with the 

remote control:

Press   or   to select a menu option.

Press

OK to confirm a selection.

Press

BACK   to go back to the previous 

screen.

Press

HOME to go to the Home menu.

The alphanumeric buttons of the remote 

control are multi-function buttons:

To select a number or an alphanumeric 

character, press a button once or more 

until you see the number or alphabetic 

character in the display of the NP2900.

To cycle through the alphanumeric 

characters that are available, press a button 

repeatedly.

To delete the last character entry from the 

display, press CLEAR.

To delete the whole last line entry 

from the display, press and hold 

CLEAR. 

The onscreen display guides you 

through the process of connecting the 

NP2900 to your home network and 

the Internet. This section describes 

the typical wired setup with static 

IP address. You can also follow the 

onscreen prompts for advanced

configurations that are not described 

in this manual.

1

  Connect an Ethernet cable (sold 

separately) to the ETHERNET jack of 

the NP2900 and the Ethernet jack of the 

wired router.

2

  Ensure that the wired router is turned on 

and has broadband Internet access.

3

  Follow the steps in chapter First-time 

connection to home network until the 

»

•

•

•

•

•

•

•

•

The alphanumeric buttons of the remote 

control are multi-function buttons:

To select a number or an alphanumeric 

character, press a button once or more 

until you see the number or alphabetic 

character in the display of the NP2900.

To cycle through the alphanumeric 

characters that are available, press a button 

repeatedly.

To delete the last character entry from the 

display, press CLEAR.

To delete the whole last line entry 

from the display, press and hold 

CLEAR. 

The onscreen display guides you 

through the process of connecting the 

NP2900 to your home network and 

the Internet. This section describes 

the typical wired setup with automatic 

IP address. You can also follow the 

onscreen prompts for advanced

configurations that are not described 

in this manual.

1

  Connect an Ethernet cable (sold 

separately) to the ETHERNET jack of 

the NP2900 and the Ethernet jack of the 

wired router.

2

  Ensure that the wired router is turned on 

and has broadband Internet access.

3

  Follow the steps in chapter First-time 

connection to home network until the 

NP2900 shows the prompt for the 

network setup.

4

 Select [Wired (Ethernet)] to start the 

network setup process.

The NP2900 acquires the automatic 

IP address.
The NP2900 shows the confirmation 

for the connection to the network.
The NP2900 shows the prompt for 

the connection to the Internet.

5

 Select [Yes] to connect to the Internet.

•

•

•

•

»

»

»

EN