Philips Consumer Lifestyle M100 Manuale Utente

User manual

1 Important

Know these safety symbols

This ‘bolt of lightning’ indicates uninsulated material within your unit may

cause an electrical shock. For the safety of everyone in your household,

please do not remove product covering.

The ‘exclamation point’ calls attention to features for which you

should read the enclosed literature closely to prevent operating and

maintenance problems.

WARNING: To reduce the risk of fire or electric shock, this apparatus

should not be exposed to rain or moisture and objects filled with liquids,

such as vases, should not be placed on this apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide

slot, fully insert.

Important Safety Instructions

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

• Protect the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for

long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

• Apparatus shall not be exposed to dripping or splashing.

• Do not place any sources of danger on the apparatus (e.g. liquid

filled objects, lighted candles).

• Where the plug of the Direct Plug-in Adapter is used as the

disconnect device, the disconnect device shall remain readily

operable.

• The small parts of this camera can be swallowed by babies or small

children. Keep these parts out of reach of children.

Notice of compliance

The device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received, including

interference that may cause undesired operation.

FCC rules

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference

to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Relocate the receiving antenna.

• Increase the separation between equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:This equipment complies

with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a

minimum distance of 20cm between the radiator and your body. This

transmitter must not be co-located or operated in conjunction with any

other antenna or transmitter.

IEEE 802.11b or 802.11g operation of this product in the U.S.A. is

firmware-limited to channels 1 through 11.

Warning: 1) Any changes or modifications not expressly approved

by the manufacturer could void the user’s authority to operate the

equipment. 2) The manufacturer is not responsible for any radio or TV

interference caused by unauthorized modifications to this equipment.

Such modifications could void the user’s authority to operate the

equipment.

Model number: PHILIPS M100/37

Trade Name: Philips

Responsible Party: Philips, P.O. Box 10313 Stamford, CT 06904

Canada

This device complies with Industry Canada licence-exempt RSS

standard(s)..

www.philips.com/welcome

M100

2 Your wireless home monitor

Congratulations on your purchase, and welcome to Philips! To fully

benefit from the support that Philips offers, register your product at

www.philips.com/welcome.

Functional overview

Camera lens:

Microphone

LED indicator

Camera base: used to adjust a position of the camera

DC power connector

Reset: insert a stiff and slender implement to reset the camera

to the default settings at the factory

Ventilator for heat

f
e

Specifications are subject to change without notice

M100_37_UM_V1.0

3 Connect power

When power is connected, the red light turns on.

4 Use your camera

You can see and hear what is happening in your room from anywhere in

the world with a smartphone.

What you need

•

An iPhone or Android phone

•

On your smartphone, download Philips Cam application

•

For iPhone, search for the application in App Store

•

For Android phone, search for the application in Android

Market

Before you start

•

Connect the camera and your smartphone in the same Wi-Fi

network

Connect the camera and smartphone via Wi-Fi

For the first time you connect the camera to a Wi-Fi network, or after
the camera is reset, set up your camera.

Make sure that the camera is connected to power.

On your smartphone, display a barcode image.

1) Launch the Philips Insight application.

2) Display the menu options and select [Add/Reconfigure Camera]

(add/reconfigure camera).

3) Select your Wi-Fi network, and enter your password.

Place the camera lens in front of the smartphone when:

•

a barcode image is displayed, and

•

the green light on the camera flashes rapidly.

Keep the camera in front of the smartphone until the green light

on the camera turns off.

•

If necessary, tap the barcode image to enlarge, and adjust

the position of the camera and/or the smartphone.

The green light turns on again after a few seconds, and the

connection is successfully made.

To connect more cameras, repeat steps 1-4 above.

Monitor home

The camera can stream live videos of what is monitored to your

smartphone.

Make sure the camera and your smartphone have been

connected (see “Connect the camera and smartphone via Wi-Fi ”).

Launch the Philips Cam application.

The connected camera(s) is displayed on the smartphone.

Tap the camera to display live videos.

What is monitored by the camera is seen live on the

smartphone.

To access options, display the menu options and follow the

onscreen instructions to finish an option setting.

5 Specifications

Output resolution

HD 720p (1280 x 720 pixels), VGA,

QVGA

Lens

Frame rate

22 fps at HD 720p, 30 fps with h.264

at WVGA

Focus mode

fixed focus

Focus range

50cm to infinity

Video format

h.264, YUY2

Connectivity

USB 2.0

Power supply

DC 5V, 500mA

Dimensions (w x h x d)

45 x 230 x 15.5mm

Net weight

approx. 230g

Operating temperature

0 to 45 degrees celsius

6 Service and support

To keep the warranty valid, never try to repair the camera yourself.

If you have problems using this camera, register your camera and get

support at www.philips.com/welcome.

If you contact Philips, you will be asked for the model and serial number

of this camera. The model number and serial number are on this

camera. Write the numbers here:

Model No. __________________________

Serial No. ___________________________

M100_37_IFU.indd 1

2/14/2012 5:43:09 PM