HARRIS CORPORATION MLINK Manuale Utente

This section provides instructions for setting up and using the Subscriber Station (client) Web Page using 
a Web browser. 

When accessing the Web page we recommend using Mozilla Firefox 2.0 (or higher) or Microsoft Internet 
Explorer 6.0 (or higher).  In addition, before you can access the SS Web Page, you need to ensure that 
your Web browser’s settings will enable access to the tool.  The following procedure describes how to 
configure Microsoft Internet Explorer for this purpose. 

1.  Start Internet Explorer. 

2.  From the IE menu, select Tools Æ Internet Options. 

3.  In the Internet Options window, click the General tab, and then in the “Temporary Internet Files” 

group, click the Settings button.  The Settings window opens. 

4.  In response to “Check for newer versions of stored pages”, select the “Every visit to the page” option, 

and then click OK.  This ensures you will always view current information. 

5.  Click the Security tab, and then configure the following security settings: 

a.  Select the Trusted Sites zone. 

b.  Click the Sites button. 

c.  In the Add this Web site to the Zone field, enter the client’s IP address, for example:  

http://10.0.0.1 

d.  Click Add, and then click OK. 

6.  In the Internet Options window, click the Apply button, and then click OK. 

Each client has a pre-configured IP address that is used to access the SS Web Page.  This Web Page 
communicates with the Web server software embedded in the client. 

1.  Open a Web browser session. 

2.  Enter the client’s IP address in the URL Address field. 

3.  Press the <Enter> key or click the Go button.