Tyco Safety Products/Sensormatic AMS9050 Manuale Utente
AMS-9050 CONTROLLER
8200-0537-02, REV. B
INSTALLATION AND SERVICE GUIDE
1 of 31
AMS-9050 Controller
ZE9050
Contents
© 2006 Sensormatic Electronics Corp.
To the Installer
This installation and service guide explains how to
install, setup, and service the AMS-9050 controller.
Parts required to install this system are:
- AMS-9050
install, setup, and service the AMS-9050 controller.
Parts required to install this system are:
- AMS-9050
controller
- AMS-1100/1101 exit antenna(s) or
AMS-1080 aisle antenna(s)
Other documents that may be required for
installation are:
- AMS-9050 Planning Guide, 8200-0537-01.
installation are:
- AMS-9050 Planning Guide, 8200-0537-01.
Note:
There may be installation
restrictions on antennas in certain
countries. See antenna installation guides
for restrictions, if any.
countries. See antenna installation guides
for restrictions, if any.
Regulatory Restriction:
This device is
only intended to be installed as described
in the installation guide.
in the installation guide.
- Because
customer
requirements dictate the
placement of system components, your
Sensormatic representative will supply this
information separately.
Sensormatic representative will supply this
information separately.
- If this product was installed in a European
Union or European Free Trade Association
member state, please give the Declaration of
Conformity included with this product to the
manager or user. By law, this information must
be provided to the user.
member state, please give the Declaration of
Conformity included with this product to the
manager or user. By law, this information must
be provided to the user.
- Because of the number of antennas and
accessories that can connect to this controller,
methodically install this system to avoid
problems. See “System Setup” in this guide for
guidance on how to setup antennas.
methodically install this system to avoid
problems. See “System Setup” in this guide for
guidance on how to setup antennas.