Cybiotronics Limited 386001 Manuale Utente

 

18

 
CONNECTING THE BASE UNIT 
1.  Plug one end of the telephone line cord into the jack at the back of the base unit and 

plug the other end of the cord into the modular telephone wall jack. 

2.  Press the line cord into the slot provided at the back of the telephone. 
3.  Plug the AC adaptor into the 7.5V DC jack on the base unit and the other end into a 

standard 120V AC wall outlet. 

4.  Press the cords into the slot on the housing to prevent the cords from pulling loose. 
5.  Set the base unit on a tabletop and then place the handset on the base unit. 
 
Note: 
1.  Use only the AC adaptor supplied. 
2.  Connect the AC adaptor to a continuous power outlet. 
3.  Place the base unit close to the AC outlet so that you can unplug the AC adaptor 

easily. 

Tip: 
If your telephone outlet is not modular, contact your telephone company for assistance. 
 
 
 
REGISTRATION & DE-REGISTRATION OF HANDSET 
The handset included in this package has been pre-registered to the Base Unit and 

designated as “HS (1)”. When additional handsets are purchased, they must also be 

registered to the Base Unit in order to work with the system. They will be automatically 

assigned extension numbers in the following sequence: HS (2), HS (3) and HS (4), which 

can be renamed later. 
 
NOTE:   
To order additional handsets, Call 

 (see page 58 for details) 

 
An unregistered handset will display “HS _ _”. 
 
 
 
 

        NO NEW CALLS 

  HS_ _ 

  12 : 00AM  01/01          

 

 

SAVE   SERVICE   MENU   DIR.  DIAL V.M