Tait International Limited TBCH1A Manuale Utente

TB9400 Installation and Operation Manual

© Tait Limited April 2014

1.

If you have not already done so, carry out the instructions in 

2.

At the rear of the reciter, unplug the RF input cable 

b

, any system 

cables 

c

, and the external reference 

d

 and 1PPS 

e

 cables (if 

fitted).

3.

At the front of the reciter, unplug the transmit reverse 

f

 and transmit 

forward 

g

 cables (if fitted), and move both cables to one side. 

Unplug both ends of the system control bus cable 

h

 and remove it.

4.

Loosen the screw securing the retaining clamp 

i

 and rotate the 

clamp through 90° to clear the module.

5.

Slide the reciter out of the subrack, taking care not to damage any of 
the cables.

b

c

d

e

f

g

h

i