Johnson Controls Interiors L.L.C. BLUE13M Manuale Utente
The device under test is manufactured by the grantee (Johnson Controls Interiors L.L.C.) and sold as an
OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-
user has all applicable / appropriate operating instructions.
When end-user instructions are required, as in the case with this product, the grantee must notify the
OEM to notify the end-user.
Johnson Controls Interiors L.L.C. will supply the following information to the reseller/distributor
dictating what must be included in the end user’s manual for the commercial product:
OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-
user has all applicable / appropriate operating instructions.
When end-user instructions are required, as in the case with this product, the grantee must notify the
OEM to notify the end-user.
Johnson Controls Interiors L.L.C. will supply the following information to the reseller/distributor
dictating what must be included in the end user’s manual for the commercial product:
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information must be included in the end product user’s manual to ensure continued FCC
regulatory compliance.
regulatory compliance.
************************************************************************
Modification statement
Johnson Controls Interiors has not approved any changes or modifications to this device by the user. Any
changes or modifications could void the user’s authority to operate the equipment.
Interference statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Wireless notice:
This product emits radio frequency energy, but the radiated output power of this device is far below the
FCC frequency exposure limits. This equipment complies with FCC RF radiation exposure limits forth for
an uncontrolled environment. Nevertheless, the device should be used in such a manner that the
potential for human contact with the antenna during normal operation is minimized.
This product integrates an AR5550 CDMA modem (FCC ID: N7NAR5550, IC: 2417C-AR5550. The AR5550
modem is granted with a modular approval for mobile applications. Integration has been done meeting
the following conditions:
1.
Johnson Controls Interiors has not approved any changes or modifications to this device by the user. Any
changes or modifications could void the user’s authority to operate the equipment.
Interference statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Wireless notice:
This product emits radio frequency energy, but the radiated output power of this device is far below the
FCC frequency exposure limits. This equipment complies with FCC RF radiation exposure limits forth for
an uncontrolled environment. Nevertheless, the device should be used in such a manner that the
potential for human contact with the antenna during normal operation is minimized.
This product integrates an AR5550 CDMA modem (FCC ID: N7NAR5550, IC: 2417C-AR5550. The AR5550
modem is granted with a modular approval for mobile applications. Integration has been done meeting
the following conditions:
1.
At least 20cm separation distance between the antenna and any person body is maintained at
all times.
all times.
2.
To comply with FCC/IC regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain including cable loss in a mobile only
exposure to RF radiation, the maximum antenna gain including cable loss in a mobile only