Johnson Controls Interiors L.L.C. MS-BTCVT-0 Manuale Utente
Converter with Bluetooth® Wireless Technology (BTCVT) Installation
Instructions
1
this information may change
Applications
The Converter with Bluetooth® wireless technology
(BTCVT) is a communications converter that provides
a temporary connection between AIM software and a
field device to commission, synchronize, and balance
Metasys® system extended architecture hardware
controllers.
(BTCVT) is a communications converter that provides
a temporary connection between AIM software and a
field device to commission, synchronize, and balance
Metasys® system extended architecture hardware
controllers.
The BTCVT provides communication from the Field
Controller (FC) bus or the Sensor and Actuator (SA)
bus to a Bluetooth wireless technology enabled device,
such as a laptop computer. The BTCVT converts
Master Slave Token Passing (MSTP) protocol to
2.4 GHz Bluetooth wireless communication and from
wireless communication back to MSTP.
Controller (FC) bus or the Sensor and Actuator (SA)
bus to a Bluetooth wireless technology enabled device,
such as a laptop computer. The BTCVT converts
Master Slave Token Passing (MSTP) protocol to
2.4 GHz Bluetooth wireless communication and from
wireless communication back to MSTP.
A strap, provided with the BTCVT, allows you to hang
the BTCVT next to the contoller while the wireless
connection allows you to be up to 10 m (33 ft) away
while you commission the controller with a laptop
computer.
the BTCVT next to the contoller while the wireless
connection allows you to be up to 10 m (33 ft) away
while you commission the controller with a laptop
computer.
The BTCVT is compatible with the following MSTP
devices:
devices:
•
Field Equipment Controller (FEC)
•
Variable Air Volume Modular Assembly (VMA)
•
Input/Output Module (IOM)
•
Network Sensors
The BTCVT uses Bluetooth wireless technology, but is
not compatible with other Bluetooth wireless devices.
Only use the BTCVT with the wireless card supplied
with the BTCVT or a wireless processor.
not compatible with other Bluetooth wireless devices.
Only use the BTCVT with the wireless card supplied
with the BTCVT or a wireless processor.
Installation
Observe the following guidelines and see the Mounting
section in this document.
section in this document.
•
Verify that all parts are shipped with the BTCVT.
•
The blue protective boot minimizes shock damage
to the BTCVT. If removed from the protective boot,
the BTCVT is prone to physical damage.
to the BTCVT. If removed from the protective boot,
the BTCVT is prone to physical damage.
Parts Included
•
one BTCVT
•
one 3Com® Bluetooth PC card and vendor-
supplied software
supplied software
•
one 5-ft retractable cable
•
one set of Installation Instructions
•
one hanging strap with internal magnet
Special Tools Needed
The BTCVT provides a wireless link to the controller.
To access the BTCVT, you need the following:
To access the BTCVT, you need the following:
•
laptop Computer running Microsoft®
Windows® 2000 Professional operating system or
later with the wireless card installed.
Windows® 2000 Professional operating system or
later with the wireless card installed.
•
AIM software
IMPORTANT: Magnetic fields can cause damage to
magnetic storage media, including cassette tapes,
floppy disks, credit cards, and video tapes. Keep all
magnets away from all types of magnetic media.
magnetic storage media, including cassette tapes,
floppy disks, credit cards, and video tapes. Keep all
magnets away from all types of magnetic media.
Converter with Bluetooth® Wireless Technology (BTCVT)
Installation Instructions
MS-BTCVT-0
Part No. 24-10108-2
Rev. —
Issued February 1, 2005