Honeywell International Inc. 8DLLYNXREN-2 Manuale Utente

6(&85,1*7+(35(0,6(6

'LVDUPLQJWKH6\VWHP

Use the 

2))

 key to disarm the system and to silence alarm and trouble sounds. See the SUMMARY 

OF AUDIBLE NOTIFICATION section for information, which will help you to distinguish between fire 
and burglary alarm sounds. 

 

IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter the premises, but 
call the police from a nearby safe location. If you return after an alarm has occurred and the main 
sounder has shut itself off, the keypad will beep rapidly upon entering. This indicates that an alarm 
has occurred during your absence and an intruder may still be on the premises. LEAVE 
IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.  

 

 2))

<RXU XVHU FRGH

 

The READY indicator will light (if no alarms have occurred while armed) and the keypad will beep 
once to confirm that the system is disarmed. 

 

0HPRU\RI$ODUP

If an alarm occurs, the keypad displays the zone number (s) that caused the alarm and the type of 
alarm (e.g., “FIRE ALARM”). These messages remain displayed until cleared by a user.  
 
To clear the display, note the zone number displayed and enter an OFF sequence (enter your security 

code and press the 

2))

 key).  

 
If the READY indicator is blinking, go to the displayed zone and correct the fault (close windows, etc.). 
If the fault cannot be corrected, notify your alarm company.