ademco 8DLTSSCBASE Manuale Utente
– 3 –
KEYS
Access the Base control keys by lifting up the door. The Keypad keys are continuously backlit for ease of
use. Access the Keypad keys by opening the swing-down door. The Keypad keys are continuously
backlit for ease of use.
KEY
KEY
DESCRIPTION
OFF
Disarms the burglary portion of the system, silences alarms and audible trouble
indicators, and clears visual alarm trouble after the problem has been corrected.
AWAY
Completely arms both perimeter and interior burglary protection by sensing an intruder's
movements through protected interior areas as well as guarding protected doors,
windows, etc. Late arrivals can enter through an entry delay zone (entrance door) without
causing an alarm if the system is disarmed before the entry delay time expires.
STAY
Arms the perimeter burglary protection, guarding protected doors, windows and other
perimeter protection points, and sounds an alarm if one is opened. Also allows automatic
bypassing of certain areas which permits movement within your house without causing
an alarm. Late arrivals can enter through an entry delay zone (entrance door) without
causing an alarm if the system is disarmed before the entry delay time expires.
M AX
Arms in manner similar to AWAY mode, but eliminates the entry delay period, thus
providing maximum protection. An alarm will occur immediately upon opening any
protection point, including entry delay zones (entrance doors).
TEST
(Keypad only) - Tests the system and alarm sounder if disarmed.
BYPASS
(Keypad only) - Removes individual protection zones from being monitored by the system.
Displays previously bypassed protection zones.
I NSTANT
Arms in manner similar to STAY mode, but turns off the entry delay period, offering
greater security while inside and not expecting any late arrivals. An alarm will occur
immediately upon opening any perimeter protection point, including entry delay zones.
CODE
(Keypad only) - Allows the entry of additional user codes that can be given to other users
of the system.
CH I M E
(Keypad only) - Turns on and off the CHI ME mode. When on, any entry through a
protected delay or perimeter zone while the system is disarmed will cause a tone to sound
at the Keypad(s).
READY
(Keypad only) - When depressed prior to arming the system, the Keypad will display all
open protection zones within the Keypad's home partition. This key is also used to display
all zone descriptors that have been programmed for your system, by holding the key down
for at least 5 seconds.
[#]
(Keypad only) - Permits ARMING of the system without use of a security code ("Quick
Arm", if programmed).
Numeric
keys 0-9
Used to enter your individual security access code(s).
Special
function
keys
Panic alarm activation (Keypad only). The panic alarms are activated by pressing a
Special Function Key (see below). Panic key functionality and the type of panic alarms
produced, is determined by the control panel’s capability and programming. (Check with
your installer for the availability and assignment of these panic keys.)
SPECIAL FUNCTION KEYS (KEYPAD ONLY)
The A, B, and C keys located to the left of the
numeric keys can be programmed as Panic Alarm
Activation keys. (Check with your installer for the
availability and assignment of these panic keys.)
Key Function
A
B
C
A
B
C
PLEASE GO TO THE BOTTOM OF
PAGE 7 FOR FCC / IC AGENCY
STATEMENTS.
PAGE 7 FOR FCC / IC AGENCY
STATEMENTS.