Westell Inc. A9081XXYY-07 Manuale Utente

 

 

 

 

 

030-300479 Rev. A 

23 

October 2005 

 User Guide 

 
After clicking on OK in the preceding screen, the Network screen will be displayed. The Network screen shows the 
settings for the newly created location. From the Configure field in the Network screen, select Built-in Ethernet. 
Click on Save. 
 
NOTE: Default settings for the Built-in Ethernet configuration are sufficient to operate the Gateway.  

 

 

 

 
To verify that the computer is communicating with the Gateway, follow the instructions below. 
 
1.  Go to the “Apple” icon in the upper-right corner of the screen and select System Preferences. 
 
2. From 

the System Preferences screen, click on the Network icon. The Network screen will be displayed. 

 
3. From 

the 

Configure field in the Network screen, select Built-in Ethernet. 

 
4.  View the IP address field. An IP address that begins with 192.168.1 should be displayed. 
 
NOTE: The DHCP server provides this IP address. If this IP address is not displayed, check the Gateway’s wiring 
connection to the PC. If necessary, refer to section 6 for hardware installation instructions.