Toshiba Client Solutions CO. LTD. DCE46036A Manuale Utente

Pagina di 2
 
 
 
 
 
 
 
 
 
 
 
 
March 3, 2003 
 
 
Mr. Richard Fabina, Chief, 
FCC Authorization Branch, 
Columbia, MD 21045 
 
Subject:  FCC ID: CJ6DCE46036A; EA873846 
                               CellPhone/PCS Model  CDM-9500 
 
   
  -Request for Grant Set Aside for Correction/Revision of SAR Values 
 
 
                             Dear Richard: 
                             
                            Our great thanks to you for accepting our request to set aside the Grant for the subject  
                            Phone for correction of the maximum Body SAR value 
                            In addition to the Body SAR value, while in the set aside mode, we respectfully request  
                            That the maximum Head SAR  be revised. The reason and rationale for this are as  
                            Follows: 
 
Original Grant - 6/18/02 
AMPS/CDMA Modes (Part 22) - Head SAR: 1.38 W/Kg 
PCS/CDMA Modes (Part 24) - Head SAR: 1.25 W/Kg 
 
Grant Reissued – 8/28/02 
#1 C2PC - Application Date, 8/02/02 Comprised of:  
                    >Metalized the front panel area of the cellphone 
                    >Used production RF cables to set the conducted power 
 
         (cable loss for 800 MHz=1.5 dB (no change); Cable loss for         
                      PCS=2.5dB  
 -SAR measurements were performed and submitted. Results were as follows: 
AMPS/CDMA Modes (Part 22) - Head SAR: 1.33 W/Kg 
PCS/CDMA Modes (Part22) - Head SAR: 1.35 W/Kg  
 
Grant Reissued – 12/03/02 
#2 C2PC - Application dated, 11/15/02 Comprised only of addition of new belt 
clip & leather case 
For this application, only Body SAR measurement was made. But the Grant  
Was issued as follows: 
AMPS/CDMA Modes (Part 22) - Head SAR: 1.38 W/Kg 
PCS/CDMA Modes (Part 24) - Head SAR: 1.25 W/Kg 
 
As you can see above, in this last permissive change grant, the highest 
AMPS/CDMA SAR value was indicated. This value, 1.38 W/Kg was measured  
on the original application for the very first CDM-9500 model. However, it was 
decided not to produce and sell this model and within 6 weeks of receipt of the 
grant, our factory submitted the modified model for testing at PC Test and an  
application was filed on Aug. 2nd. (#1 C2PC) 
As noted above, the grant reissued for the #1 C2PC, specified a lower 
AMPS/CDMA Head SAR