Toshiba Client Solutions CO. LTD. UDB1H05BT Manuale Utente

Pagina di 48
43
Troubleshooting
If you feel that trouble may have occurred, check the following items before asking for services.
Trouble
Possible cause
Actions to be taken
See:
The battery is dead.
Charge the battery.
21
The power plug for the AC
adapter is disconnected from the
outlet.
Insert the power plug into the
outlet.
21
The Product is not turned on.
The battery switch is not placed
in the ON position.
Place the battery switch in the
ON position.
20
The built-in battery soon loses
charges although it has been
charged.
The service life of the built-in
battery has ended.
Replace the battery with a new
one.  Ask your dealer to replace
the built-in battery.
9
The setup utility is not installed.
Install the setup utility into your
personal computer.
22
The USB cable is not connected.
Connect the USB cable to the
Product and your personal
computer.
37
The AC adapter is not
connected.
Connect the AC adapter to the
Product.
21
You cannot start the setup utility.
The Product is not started in
configuration mode.
Start the Product in configuration
mode.
24
The Product is not powered up.
Power up the Product.
24
The USB cable is disconnected.
Connect the Product to the
destination device using the
USB cable.
37
The Product cannot be
connected from a destination
device using the USB cable.
The USB driver is not installed.
Install the USB driver into your
personal computer.
22
Noise is generated in the
Product.
An internal component
generates noise.
This is not trouble.
Calendar time settings
disappear.
The Product is left for a long
period.
Charge the battery, and set the
date and time again.
32, 33
The battery is charged
abnormally.
Consult your dealer.
 in the LCD screen and the
battery frame are blinking.
An AC adapter other than the
supplied one is connected.
Connect the supplied AC
adapter.
21
 in the LCD screen and
 are blinking concurrently.
The disk has incurred an error.
If you cannot solve the problem
by resetting, consult your dealer.
All the indications in the LCD
screen are blinking concurrently.
An unrecoverable error has
occurred.
If you cannot solve the problem
by resetting, consult your dealer.
„ 
Resetting
If you cannot solve the problem even by taking the above actions, or if the Product has incurred an error, you
can reset the Product by pressing the reset switch.  Even if you press the reset switch, settings by the setup
utility are not lost.