Toshiba Client Solutions CO. LTD. UPA3710BT Manuale Utente
10
Moreover, the version will switch to evaluation copy automatically that only
allows transmitting 5M Bytes data totally. (Figure 3.3)
allows transmitting 5M Bytes data totally. (Figure 3.3)
Figure 3.3: Evaluation copy (5MB limit)
This activation is auto-executed on background without any user-operation
that will not take effect to any licensed device.
that will not take effect to any licensed device.
3.5 Search for Other Bluetooth Enabled Devices
Before it can connect, your computer must first detect other Bluetooth
enabled devices in range.
enabled devices in range.
Initiate a Device Search
1. Make sure that the Bluetooth enabled device you wish to connect to is
turned on, with sufficient battery power, and set in discoverable mode.
Have any necessary passkeys ready. If necessary, you may also need to
enable the service you want to use on the remote device. Refer to the
remote device’s user documentation for instructions.
Have any necessary passkeys ready. If necessary, you may also need to
enable the service you want to use on the remote device. Refer to the
remote device’s user documentation for instructions.
If you haven’t done so already, you may also want to assign the device a
Bluetooth name. Refer to the device’s user documentation for instructions.
2. In the Main Window, click on the red ball to start the device search.
Alternatively, you can click My Bluetooth | My Device Inquiry or View |
Refresh Devices or press F5.
Refresh Devices or press F5.