Toshiba Client Solutions CO. LTD. UPP350WL2 Manuale Utente
The following table describes the items found on the Advanced Link Status screen.
Screen Item
Description
Country
The regulatory domain of the network.
The options include:
FCC
MKK
ETSI
Configure the country in the country code
selector, accessible from the Tools tab.
Transmit Power Level
The transmit power level:
Full (100%)
Half (50%)
Quarter (25%)
Eighth (12.5%)
Lowest
Configure the transmit power level on the
Advanced tab.
Network Name (SSID)
The wireless network name.
Configure the network name on the
General tab.
QoS
Shows whether the station is enabled to
cooperate in a network using Quality of
Service.
Configure QoS on the Advanced tab.
Noise Level
The amount of noise (dBm) in the current
connection.
Power Save Mode
The power management options. Power
management is disabled in ad hoc mode.
Off
Off
The adapter receives full power from the
PC.
Normal
Normal
The driver turns off power to the adapter
for brief periods over briefly-spaced time
intervals.
Maximum
Maximum
The driver turns off power to the adapter
for longer periods over more widely spaced
time intervals.
Configure the power save mode on the
General tab.
Channel/Frequency
The channel and frequency the station is
using.
WLAN Status Tab
The WLAN status tab of the Atheros Client Utility contains information about the basic service set (BSS).
The WLAN Status tab does not require any configuration.
The following table describes the items found on the WLAN Status screen.
Screen Item
The WLAN Status tab does not require any configuration.
The following table describes the items found on the WLAN Status screen.
Screen Item
Description
Network Name (SSID)
The network name of the selected wireless
LAN.
Configure the network name on the
General tab.
AP Address (BSSID)
The MAC address of the connected Access