Axcera 79XITS-7029 Manuale Utente
The amount of cleaning necessary depends greatly on the conditions in the translator room. While the electronics
have been designed to function well even if covered with dust, heavy buildups of dirt and insects will impede the
effectiveness of the cooling and lead to shutdown or premature failure.
When it is apparent that the front panel is becoming dust covered, the top cover should be opened and the
accumulated foreign material removed. A small, soft brush used in conjunction with a plastic wand-like attachment on
a small vacuum cleaner is an excellent way to remove dirt. Alcohol and other cleaning agents should not be used
unless you are certain that the solvents will not damage components or markings. Water based cleaners can be used
if only a small amount of moisture is used. The fans or heat sinks should be carefully cleaned.
Occasionally check that all RF connections are secure, but be careful not to over-tighten.
Data should be recorded for all meter readings on a regular basis. It is suggested that data be recorded once each
month and that it be retained in a rugged folder or envelope for the life of the equipment. A sample format of a log
sheet is included at the end of this section. Photocopies of this sheet may be used for if desired.
have been designed to function well even if covered with dust, heavy buildups of dirt and insects will impede the
effectiveness of the cooling and lead to shutdown or premature failure.
When it is apparent that the front panel is becoming dust covered, the top cover should be opened and the
accumulated foreign material removed. A small, soft brush used in conjunction with a plastic wand-like attachment on
a small vacuum cleaner is an excellent way to remove dirt. Alcohol and other cleaning agents should not be used
unless you are certain that the solvents will not damage components or markings. Water based cleaners can be used
if only a small amount of moisture is used. The fans or heat sinks should be carefully cleaned.
Occasionally check that all RF connections are secure, but be careful not to over-tighten.
Data should be recorded for all meter readings on a regular basis. It is suggested that data be recorded once each
month and that it be retained in a rugged folder or envelope for the life of the equipment. A sample format of a log
sheet is included at the end of this section. Photocopies of this sheet may be used for if desired.