GoPro CHDHX301 Manuale Utente
WARRANTY + DISCLAIMERS
ENGLISH:
Limited Warranty:
GoPro warrants that for a period of one (1) year from original date of purchase the product will be free from defects in materials and workmanship under normal use. In the event of a defect,
please contact GoPro Customer Support gopro.com/support for assistance. GoPro
please contact GoPro Customer Support gopro.com/support for assistance. GoPro
’s sole obligation under this warranty will be at its option to repair or replace the product. This warranty does
not apply to products damaged by misuse, accident, or normal wear and tear. Because of possible user resealing error, this product is not warranted against water housing leakage or any
resulting damage. ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS WARRANTY. GOPRO DISCLAIMS
ALL OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL GOPRO BE LIABLE FOR ANY LOSS OF DATA, REVENUE OR
PROFIT, OR FOR ANY SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED, ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE
resulting damage. ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS WARRANTY. GOPRO DISCLAIMS
ALL OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL GOPRO BE LIABLE FOR ANY LOSS OF DATA, REVENUE OR
PROFIT, OR FOR ANY SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED, ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE
THE PRODUCT, EVEN IF GOPRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL
GOPRO’S LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.
Some jurisdictions do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary by jurisdiction.
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary by jurisdiction.
IC Regulations:
This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference and; (2) this device
must accept any interference--including interference that may cause undesired operation of the device.
must accept any interference--including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
The County Code Selection feature is disabled for products marketed in the US/Canada.
For product available in the USA/ Canada markets, only channel 1~11 can be operated. Selection of other channels is not possible.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528.
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528.
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF BATTERIES ACCORDING TO INSTRUCTIONS.
The symbol above means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of
life, take it to a collection point designated by local authorities. Some collection points accept products for free. The separate collection and recycling of your product at the time of
disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
FCC STATEMENT
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user
’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and;
(2) This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government and Industry Canada of the Canadian Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and IC is 1.6W/kg. Tests for SAR are
conducted using standard operating positions accepted by the FCC and IC, with the EUT transmitting at the specified power level in different channels.
The highest SAR value for the device as reported to the FCC and IC is 1.26 W/kg (body), 1.496 W/kg (head), for
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government and Industry Canada of the Canadian Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and IC is 1.6W/kg. Tests for SAR are
conducted using standard operating positions accepted by the FCC and IC, with the EUT transmitting at the specified power level in different channels.
The highest SAR value for the device as reported to the FCC and IC is 1.26 W/kg (body), 1.496 W/kg (head), for
CHDHE-301; 1.23 W/kg (body) for CHDHN-301;
1.39
W/kg (body) for
CHDHX-301.
The FCC and IC have granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC and IC RF exposure guidelines. SAR
information on this device is on file with the FCC and IC, and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: CNFCHDHE301,
CNFCHDHN301, CNFCHDHX301.
This device is compliance with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods
and procedures specified in OET Bulletin 65 Supplement C.
The FCC and IC have granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC and IC RF exposure guidelines. SAR
information on this device is on file with the FCC and IC, and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: CNFCHDHE301,
CNFCHDHN301, CNFCHDHX301.
This device is compliance with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods
and procedures specified in OET Bulletin 65 Supplement C.
DECLARATION OF CONFORMITY
GoPro, 3000 Clearview Way, San Mateo, CA 94402 USA
Declares under our sole responsibility that the product:
Product Name:
HERO3
Model Number:
CHDHE-301
CHDHN-301
CHDHX-301
Conforms to the following Product Specifications:
EMC:
EN 55022:2010, Class B
EN 61000-3-2:2006/A1:2009/A2:2009
EN 61000-3-3:2008
EN 55024:1998/A1:2001/A2:2003
Wireless Radio Equipment:
EN 300 328 v1.7.1
EN 301 489-1 v1.8.1
EN 301 489-17 v2.1.1
Health (SAR):
EN62311:2008
Safety:
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011
The product specified above complies with the requirements of the following directives and carries the CE mark accordingly:
EMC Directive 2004/108/EC
LVD Directive 2006/95/EC
R&TTE Directive 1999/5/EC
LVD Directive 2006/95/EC
R&TTE Directive 1999/5/EC