Omnitron FlexPoint GX/T 4705-1 Dépliant
Codici prodotto
4705-1
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 140 Technology Dr. Irvine, CA 92618
© 2010 Omnitron Systems Technology, Inc. All rights reserved. FlexPoint is a Trademark of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specifications are subject to change without notice.
091-04700-001D 9/10
In this enterprise application example, FlexPoint GX/T media
converters are used to connect to multiple generations of
networking components across a campus. A legacy 100 Mbps
fiber switch (A) is directly connected to a UTP Gigabit switch
using a FlexPoint GX/T with a 100 Mbps SFP transceiver
installed. A fiber-to-desktop application (B) uses a FlexPoint
GX/T at both ends to provide 10/100/1000 copper to fiber
conversion. The FlexPoint GX/T also connects a UTP Gigabit
Ethernet switch (C) via fiber back to the main distribution
center. In all cases, multimode, single-mode, or single-mode
single-fiber can be used.
sPeCIFICatIONs
aPPlICatION examPle
OrderINg INFOrmatION
Model Type
GX/T
Protocols
IEEE 802.3
10BASE-T, 100BASE-TX, 1000BASE-T, 100BASE-FX,
1000BASE-X
Frame Size
10,240 bytes maximum frame size
UTP Cable
RJ-45, Category 5 and higher
Fiber Cables
Multimode: 50/125, 62.5/125, 100/140µm
Single-mode: 9/125µm
UTP Connectors
RJ-45
Fiber Connectors
ST, SC, LC (SFP)
DIP-Switches
Fiber: Auto-Neg, 1000, 100
UTP: Auto-Neg, 10, 100, 1000, FDX/HDX, Pause En/Dis
Loopback, Link Seg, Link Prop, Remote Fault Det.
LED Displays
Power, Fiber AN, Fiber Speed/Activity, UTP Speed/Activity,
Full/Half-Duplex
Dimensions
W: 3.0" x D: 4.0" x H: 1.0"
Weight
6 oz. (without power adapter)
Compliance
UL, CE, FCC Class A
Power
Requirements
Nominal Voltage:
Voltage Range:
Power Nominal:
Maximum Power:
Barrel Connector
9VDC
5.0 to 15.0VDC
0.3A @ 9VDC
1A @ 9VDC
Molex Connector
5VDC
5.0 to 5.25VDC
0.5A @ 5VDC
0.75A @ 5VDC
Temperature
Operating:
Storage:
0 to 50
o
C
-40 to 80
o
C
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4000m
MTBF (Hours)
Module without Power Adapter: 900,000
Module with Power Adapter
-1: 250,000
Module with Power Adapter
-2: 100,000
Fiber Type
Distance
Connector Type
Tx / Rx
Wavelength
[nm]
Min. Tx
Power
(dBm)
Max. Tx
Power
(dBm)
Min. Rx
Sensitivity
(dBm)
Max. Rx
Sensitivity
(dBm)
Min.
Attenuation
(dB)
Optical Power
Budget
ST
SC
SFP
-
-
-
-
4719-x
MM
220 / 550m¹
4706-x
4700-x
-
850
-10
-4
-17
-3
-
7
SM
12km
4707-x
4701-x
-
1310
-9.5
-3
-19.5
-3
-
10
SM
34km
-
4702-x
-
1310
-5
0
-23
-3
3
18
SM
80km
-
4703-x
-
1550
-5
0
-23
-3
3
18
SM
110km
-
4704-x
-
1550
0
5
-24
-3
8
24
SM
140km
-
4705-x
-
1550
2
5
-28
-8
13
30
SM-SF
20km
-
4710-x ♦
-
1310/1550
-9.5
-3
-20
-3
-
10.5
SM-SF
20km
-
4711-x ♦
-
1550/1310
-9.5
-3
-20
-3
-
10.5
SM-SF
40km
-
4712-x ♦
-
1310/1550
-3
0
-20
-3
3
17
SM-SF
40km
-
4713-x ♦
-
1550/1310
-3
0
-20
-3
3
17
Power Adapter Kits (-x): -0 = No power adapter included, -1 = 110-120 VAC/60 Hz (US plug), -2 = 100-240 VAC/50-60 Hz (IEC plug, no power cord).
Contact Omnitron for other fiber options and operational temperature ranges.
¹ = 62.5/125µm, 100/140µm multimode fiber up to 220m. 50/125µm multimode fiber up to 550m. Refer to the fiber cable manufacturer for multimode distance specifications.
♦ Single-Fiber converters must be used in pairs. The Tx wavelength on one end has to match the Rx wavelength on the other.