eInstruction Corporation R2 Manuale Utente

Basic Operating Instructions

Interwrite

TM

 Maestro User’s Guide

1 Enable your Maestro by starting up Interwrite PRS and selecting

the RF, Enable Master Clicker menu option. Click on the Enable
Master Clicker

 checkbox and enter the Radio ID found on the back

of your Maestro in the Master Clicker ID text box.

Turn on Maestro.

The green Connect LED will blink fast, indicating the Maestro
is ready to join the Class.

3 Connect to the Class by pressing the two-character code displayed

by the Interwrite PRS software.
The

LED will blink slowly as long as the Maestro is connected to

the Class.

4 Press a Maestro Command button (see chart below).

LED will be green if command was received.

LED will be red if command was not received.

5 Hold down the 

 button until the

LED goes off.

Maestro Button Commands

This applies only to a PRS Lesson Session.

This applies only to PRS Lesson Sessions.

This is the Function Key used to start a
PowerPoint Slide Show.

This is the equivalent of clicking on the End
Session button to end a PRS Session, or the
End Question button to end a PRS PowerPoint
Question Slide.

This can be used only during a PRS Lesson
Session.

This can be used only during a PRS Lesson
Session.

This is used during a PowerPoint Session to go
to the previous slide.

This is used during a PowerPoint Session to go
to the next slide.

This command is used to process the OK and
default buttons on dialogs.