Compuprint POLLUX Manuale Utente
125
Messages Indication
Solution
DATA SET OFF
The DSR Signal is not
connected to the printer and
is not ready for data transfer
(if the serial interface is
selected). This condition may
happen in a remote
connection (via modem) and
the DSR (DATA SET
connected to the printer and
is not ready for data transfer
(if the serial interface is
selected). This condition may
happen in a remote
connection (via modem) and
the DSR (DATA SET
READY
) signal is missing.
Press the
ON LINE
key to reset the error
condition.
INTERLOCK ERROR
CHECK INSERTION
CHECK INSERTION
Neither the rear tractor nor
the tractor cover are
installed on the printer.
the tractor cover are
installed on the printer.
Install the rear tractor or the tractor cover
on the printer.
on the printer.
JAM LOWER PATH
CHECK PAPER
CHECK PAPER
A paper jam error condition
occurred in the paper path
occurred in the paper path
Check the paper path and remove the
jammed paper. Press the
jammed paper. Press the
ON LINE
key to
reset the error condition.
JAM UPPER PATH
CHECK PAPER
CHECK PAPER
A paper jam error condition
occurred in the paper path
occurred in the paper path
Check the paper path and remove the
jammed paper. Press the
jammed paper. Press the
ON LINE
key to
reset the error condition.
NO PATH AVAILABLE
PATH CHANGING
PATH CHANGING
An electromechanical failure
occurs in the lower tractor
paper path. The printer
changes automatically to the
cut sheet paths (Manual or
ASF).
occurs in the lower tractor
paper path. The printer
changes automatically to the
cut sheet paths (Manual or
ASF).
Call Service.