Alps Electric WK1A002 Manuale Utente

　

The connector is arranged as shown in the figure below.

Terminal No.

I/O

1

-

2

I

3

I/O

4

-

■

CAUTION■

Operating temperature

range

-40~＋85　degree C

MAX 0.5mA(@12.5V 25℃) at standby

Weight

   Please DO NOT the following. Engine is not started by failure of
electronic parts. (Product can not receive the signal correctly)

   Pay attention to the following.
(The operation range might be changed by the environment. )

・

Do not contact and bring metals close to the engine SW and the

key.

・

It may not be operated when using the equipment of the same

frequency band in the vicinity.

0.03kg

Consumption current

spec

MAX 100mA(@12.5V 25℃) at operation

+B

CLOCK

DATA

　

It communicates with IC used both as Transponder and Passive RKE

through LF ANT(Z axis) of I-key H/U, and  operates as ANT to exchange
communication data depending on community signal with BCM.

　

The immobilizer antenna communicates with the transponder in the

hand unit when the hand unit is brought close, and receives the code of
the key. The immobilizer is used by bringing the hand unit close as
shown in figure.

Product name : IMMOBILIZER ANT

Type : TWK1A002

Terminal Name

FCC WARNING
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.

Size

・

Give a shock.

・

Get it wet. If it got wet, wipe and dry up.

・

Disassembly and modification.

 This device complies with Part 15 of FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of this device.

Operation of frequency

125kHz

DC8～16V

GND

AC/DC Supply

Operating voltage

DC8～16V(Inner:DC 5V)

DC12V

Range of voltage

Consumption current

Under 0.5mA（Standby current）

W40xL62xH49（mm）