Tecom Co Ltd AW4038 Manuale Utente

 Manual Ver1.0

Check to Enable/Disable NAT and Firewall functions. 

Go to “Advanced Setup” > “Firewall” to assign filter rules. 

Check to Enable/Disable IGMP Multicast, WAN Service, and QoS. 

Go to “Advanced Setup” > “Quality of Service” to assign priorities for the 

application.

Click on “Next” to go to next step. 

4.2.5 Device Setup 

Figure 15. Quick Setup – Device Setup 

Enter IP (LAN IP) Address and Subnet Mask to AW4038.

Select to Disable/Enable DHCP Server, use DHCP Server Relay, and configure 

related settings for that mode. 

Select “Configure the second IP Address and Subnet Mask for LAN interface” and 

configure if second IP Address is used. 

Click on “Next” to go to next step. 

4.2.6 Wireless Setup 

                                                                                                                                          - 18 -