Tecom Co Ltd GW6000 Manuale Utente
GW 6000 Administrative Guide Configuration
Click “Save/Reboot” to reboot the GW6000. The GW6000 would automatically save
the configuration before reboot, so that modified settings would take effect after reboot.
the configuration before reboot, so that modified settings would take effect after reboot.
6.8 Diagnostics
This page provide the following information to users:
z the network connection information on the net
z the status of GW6000's PSTN Line
z the status of GW6000’s IP Trunk Line
z the status of GW6000’s VAA Line
z the status of GW6000’s FXS
z the status of GW6000’s Extension phones
z the status of GW6000's PSTN Line
z the status of GW6000’s IP Trunk Line
z the status of GW6000’s VAA Line
z the status of GW6000’s FXS
z the status of GW6000’s Extension phones
Click Reset button will allow you release the selected trunk line or rescue the blocked
one. (Figure 6-50)
one. (Figure 6-50)
1) Network
Connection
PASS: normally connected
FAIL: connecting fail
DOWN: no connection
2) PSTN Line / IP Trunk Line / VAA / FXS
FAILED: connecting fail or registering failure
IDLE: the line is idle
N/A: the line is not available
Busy: the line is in use
3) Registered Extension Phone
LAN: registered through LAN port
WAN: registered through LAN port
Copy Right 2006 Tecom, Co. LTD. All rights reserved
Page 85 of 107