Tecom Co Ltd IG7600 Manuale Utente
IG7600 Administration Manual
Copyright 2013 Tecom, Co. LTD. All rights reserved
Page 78 of 156
Start Paging Group number: 3 paging groups are defined in IG7600. If dialing a
Paging Group number, the call will page to predefined internal IP phones. It can also
select the Range like All Paging Number. The maximum phones for each paging group
are 16.
Paging Group number, the call will page to predefined internal IP phones. It can also
select the Range like All Paging Number. The maximum phones for each paging group
are 16.
While pressing “Configuration” in “Start Paging Group number”, it shows Paging
Group Configuration screen. (Figure 6-60)
Group Configuration screen. (Figure 6-60)
Figure 6-60. Voice – System – Numbering Plan – Paging Group
Start UCD Group number: 4 UCD groups are defined in IG7600. The maximum
phones for each UCD group are 17. If one UCD Group is assigned to Answering
Position of certain line, when there is an incoming trunk call, extensions of the UCD
group will be called and ringing
phones for each UCD group are 17. If one UCD Group is assigned to Answering
Position of certain line, when there is an incoming trunk call, extensions of the UCD
group will be called and ringing
While pressing “Configuration” in “Start UCD Group number”, it shows UCD Group
Configuration screen. (Figure 6-61)
Configuration screen. (Figure 6-61)
Figure 6-61. Voice – System – Numbering Plan – UCD Group
There are seven items to be decided.
For Ring Mode, IG7600 supports “All Ring”, “Linear” and “Distributed” mode. The “All
Ring” mode is no needed to use “No Answer Time” and “Timer Enable”.
Ring” mode is no needed to use “No Answer Time” and “Timer Enable”.