Nagano Japan Radio Co . Ltd. NJT511 Manuale Utente
8
Components and Functions
Indication LED
Illuminates in green when the BHT has successfully read a bar code.
Illuminates in green when the BHT has successfully read a bar code.
Liquid crystal display (LCD)
Shows the characters and graphic patterns.
Shows the characters and graphic patterns.
Bar-code reading
window
window
Trigger switch
(M3 key)
Press this switch to start
bar-code reading.
(M3 key)
Press this switch to start
bar-code reading.
Trigger switch (M4 key)
Press this switch to start bar-code reading.
Press this switch to start bar-code reading.
IrDA interface port
Used to exchange data/programs
with the host computer via its
integrated IR port or via the optical
communication unit CU-300.
Used to exchange data/programs
with the host computer via its
integrated IR port or via the optical
communication unit CU-300.
Hand strap
Be sure to put your hand
through this strap to
prevent you from dropping
the BHT accidentally.
Be sure to put your hand
through this strap to
prevent you from dropping
the BHT accidentally.
Connector cover
Inside this cover is
the direct-connect
interface port.
Inside this cover is
the direct-connect
interface port.
Battery cover lock
Use this lock to
lock/unlock the
battery cover.
Use this lock to
lock/unlock the
battery cover.
Battery cover
Remove this cover to replace the
battery cartridge.
Remove this cover to replace the
battery cartridge.
Built-in antenna
Do not cover this antenna section with
metal-evaporated tape or by hand.
Doing so may result in communications
failures.
metal-evaporated tape or by hand.
Doing so may result in communications
failures.