Lectrosonics Inc HMA9 Manuale Utente
HMa-941
LECTROSONICS, INC.
14
Specifications and Features
Digital Hybrid Wireless
®
is a revolutionary design
that combines digital audio with an analog FM radio
link to provide outstanding audio quality and the
exemplary RF performance of the finest analog
wireless systems.
The design overcomes channel noise in a dramati-
The design overcomes channel noise in a dramati-
cally different way, digitally encoding the audio in
the transmitter and decoding it in the receiver, yet
still sending the encoded information via an analog
FM wireless link. This proprietary algorithm is not a
digital implementation of an analog compandor. In-
stead, it is a technique which can be accomplished
only in the digital domain.
The process eliminates compandor artifacts,
The process eliminates compandor artifacts,
expanding the applications to include test and mea-
surement of acoustic spaces.
*US Patent 7,225,135
Specifications
Operating Frequency Range:
941.525 - 951.975 MHz
952.875 - 956.225 MHz
956.475 - 959.825 MHz
Frequency Selection Steps:
Selectable; 100 kHz or 25 kHz
RF Power output:
Selectable 50/100 mW
Pilot tone:
27 to 32 kHz; 3.0 kHz deviation
(in the Digital Hybrid mode)
Frequency stability:
± 0.002%
Spurious radiation:
Compliant with ETSI EN 300 422-1 v1.4.2
Equivalent input noise:
–125 dBV (A-weighted)
Input level:
Nominal 2 mV to 300 mV, before limiting.
Greater than 1V maximum, with limiting.
Input impedance:
300 Ohms
Input limiter:
Dual envelope “soft” limiter; greater than 30
dB range
Gain control range:
55 dB; panel mounted membrane switches
Modulation indicators:
Dual bi-color LEDs indicate modulation of
-20, -10, 0, +10 dB referenced to full
modulation
Audio Performance (overall system):
Frequency Response:
35 Hz to 20 kHz (+/-1dB)
Low frequency Roll-off:
Adjustable for -3dB
@30, 50, 70, 100, 120 or 150 Hz)
THD:
0.2% (typ.) 100 Hz to 20 kHz
System Dynamic Range:
SmartNR
no limiting
w/limiting
OFF 103.5 108.0
NORMAL 107.0
NORMAL 107.0
111.5
FULL 108.5 113.0
Note: The dual envelope “soft” limiter
provides exceptionally good handling of
transients using variable attack and release
time constants.
Once activated, the limiter compresses 30+
dB of transmitter input range into 4.5 dB of receiver output range, thus reducing the measured
figure for SNR without limiting by 4.5 dB.
Controls & Indicators:
•
Power/Phantom “ON-OFF”
•
Phantom voltage selector
•
Audio input gain
•
LCD w/membrane switches
•
LED audio level indicators
Audio Input Jack:
Standard 3-pin XLR (female)
Phantom Power:
5V @ 18 mA max., 15V @ 15 mA max.
and 48 V @ 4 mA max., plus “OFF”
USB port:
Used for firmware updates
IR (infrared) port:
For quick setup by transferring settings from
an IR enabled receiver
Antenna:
Housing and attached microphone/cable
form the antenna
Battery:
Two 1.5 Volt AA alkaline
Battery Life (Duracell Quantum):
AA alkaline; No Phantom Power:
AA alkaline; No Phantom Power:
5h 0m*
AA alkaline; 48V Phantom Power: 3h 30m**
*Tested with a dynamic microphone
*Tested with a dynamic microphone
**Tested with a Sanken CS1 for a phantom-powered microphone
Weight:
Weight:
6.7 oz (190 grams) without batteries
Dimensions:
4.25x1.62x1.38 inches
Emission Designator:
180KF3E