3M Company TSSDW40143 Manuale Utente
38
Removing the 1 Piece (Gen 4)
Step 2:
Step 2:
Step 2:
Step 2:
Use a 3M Electronic
Monitoring flathead
screwdriver to push on
the tamper plugs to
break them.
Use a 3M Electronic
Monitoring flathead
screwdriver to push on
the tamper plugs to
break them.
Step 3:
Step 3:
Step 3:
Step 3:
Use the screwdriver to
remove the tamper plugs
from the brackets.
Use the screwdriver to
remove the tamper plugs
from the brackets.
Step 1:
Step 1:
Step 1:
Step 1:
Cut the strap by using
the strap cutters and
remove the 1 Piece (Gen
4) from the offender’s
leg.
Cut the strap by using
the strap cutters and
remove the 1 Piece (Gen
4) from the offender’s
leg.
Step 5:
Step 5:
Step 5:
Step 5:
While keeping the latch
depressed, pull the strap
with the attached pin
trays out of each bracket.
Discard the tamper plugs
and straps.
While keeping the latch
depressed, pull the strap
with the attached pin
trays out of each bracket.
Discard the tamper plugs
and straps.
Note:
Note:
Note:
Note: Do NOT reuse the
Do NOT reuse the
Do NOT reuse the
Do NOT reuse the
tamper plugs.
tamper plugs.
tamper plugs.
tamper plugs.
Note:
Note:
Note:
Note:
Note: Do NOT remove
Do NOT remove
Do NOT remove
Do NOT remove
tamper plugs from the
tamper plugs from the
tamper plugs from the
tamper plugs from the
brackets of the 1 Piece
brackets of the 1 Piece
brackets of the 1 Piece
brackets of the 1 Piece
brackets of the 1 Piece
(Gen 4)
(Gen 4)
(Gen 4)
(Gen 4)
(Gen 4) unless there is a
unless there is a
unless there is a
unless there is a
strap with an attached
strap with an attached
strap with an attached
strap with an attached
pin tray inside the
pin tray inside the
pin tray inside the
pin tray inside the
pin tray inside the
bracket.
bracket.
bracket.
bracket.
bracket.
Step 4:
Step 4:
Step 4:
Step 4:
Using the screwdriver,
press down the latch
attached to the pin tray.
Using the screwdriver,
press down the latch
attached to the pin tray.