TOA Corporation WM-D5300 Manuale Utente

 step 1. Plug the microphone's plug into the input 

connector as illustrated.

 step 2. Confirm that the wireless microphone and the

wireless receiver are identical in the bank and 

channel number.

If not identical, turn the power switch to the 

OFF position, then set the bank and channel 

numbers to the same ones as the receiver.

 step 3. Turn the Power switch to the ON position. 

Then,  confirm  the  battery  checker  will  light

green or orange.

 

 step 4. Turn the Power switch to the OFF position 

after use.

 

 step 1. Turn off the power switch.

 step 2. Detach the battery cover.

 step 3. Using the supplied screwdriver, set the bank 

selector switch’s pointer to the desired number, 

and set the channel selector switch’s pointer 

likewise.

 step 4. Replace the battery cover.

Plug lock

Secure the connection with the plug lock.

H

L

Screwdriver

(accessory)